Blade Servers
PRODUCTS
SUPPORTS
LEARN
NEWS
RESOURCE
   
 
Product Information
Technical Information
Related Products
 
     
 

ExtremeNode™ 2400 Dual Intel Xeon™ Blade Node

Microprocessor
  • Intel Xeon™ processors supporting 2.8, 3.0, 3.2, 3.4, and 3.6 GHz microprocessors
  • Support Dual mPGA604 ZIF sockets
  • Supporting 800 MHz system bus speed
  • 1MB L2 Advanced Transfer Cache
  • Intel EM64T support
  • Compatible with existing Intel® architecture-based software
Memory
  • Eight 184-pin DDR SDRAM DIMM 2.5v sockets (Dual channel memory bus)
  • Supports up to six DDR-333 ECC/Registered memory
  • Supports up to eight DDR-266 ECC/Registered memory
  • Supports up to 16GB of registered DDR memory total
Chipset
  • Intel E7320 MCH
  • Intel 6300ESB South Bridge
  • SMSC DME1737 LPC I/O chip
Graphics and displays
  • ATI RAGE™ XL PCI controller 8 MB frame buffer
Integrated Network Controller
  • 2 x Integrated Broadcom BCM7504C dual-channel Giga bit Ethernet (RJ-45)
Integrated SATA Controller
  • Intel 6300ESB SATA Controller
  • Supports SATA 1.1 specification
  • Two SATA-150 Controller
  • Supports RAID 0, or 1
Integrated Enhanced IDE Controller
  • Dual IDe channels
  • Supports up to four EIDE devices
  • Supports for UDMA 33/66/100/133 IDE drivers and ATAPI compliant devices
System Management
  • SMSC DME1737 and EMC6W201 with hardware monitoring
  • Nine 3-pin fan headers
  • Six fan headers with tachmeter monitoring
  • Programmable auto fan control based on temperature
  • Temperature and voltage monitoring
  • Watchdog timer
Expansion Slots
  • One 3.3V 66 Mhz PCI-X bus 90 degree riser card (optional)
Front Accessible Ports
  • Stacked PS/2 mouse and keyboard ports
  • Stacked two USB v2.0 Ports
  • One 9-pin UART serial port
  • One 15-pin VGA port
  • Two RJ45 10/100/1000 Base-T ports with activity LED
  • Power Connector
  • PCI-X Slot
BIOS
  • Phoenix BIOS on 8 Mbit LPC Flash ROM
  • Supports APM 1.2 & APCI 1.0
  • PnP, DMI 2.0 power management
Power Supply
  • Input: 110/220V auto sensing
  • Output : 400 Watts max
Hard Disk Drive
  • Supports SATA-150 120, 160, 200 and 250MB Hard Drive
  • 1.5 Mbits/sec transfer rate
  • Supports up to one 3.5" hard disk drives
  • 2nd 3.5" hard drive bay optional
 


 

 

Home

Terms of Use

Privacy Policy

Contact Us

Copyright ©2003-2004 Rackmount.com, Inc. All rights reserved.
ExtremeNode™ is a brand of Rackmount.com Inc.

Rackmount.com Inc. 134 Linden Avenue, Suite 200, Westbury, NY 11590 Tel: 516-997-5050 Fax: 516-997-5784